Yaskawa i80M Appendix User Manual
Page 228
Advertising
9.2 PARAMETER NUMBER TABLE (Cent’d)
Parameter No.
N A M E
POSCHG3
ZOFSNEG
(Bit No.
7
6
5
4
3
2
1
o
)
coordinate system is used to display positions
on program check screen.
Mechanical coordinate system is used to display
positions on program check screen.
coordinate system is used to display positions
on offset screen.
Mechanical coordinate system is used to display
positions on offset screen.
Mechanical coordinate system is used to display
positions on
shift screen and displacement
screen.
coordinate system is used to display positions
on
shift screen and displacement screen.
Offset value is added at Z-axis current position display.
Offset value is not added at Z-axis current position
display.
– 2 2 8 –
Advertising