Yaskawa i80M Appendix User Manual
Page 296
Advertising
9.2 PARAMETER NUMBER TABLE (Cent’d)
Parameter No.
N A M E
STL5
ST L4
STL3
STL2
STL1
(Bit No.
7
6
5
4
3
2
1
O : Checks 5th-axis 1st inhibit area stored stroke limit.
1: 5th-axis 1st inhibit area stored stroke limit not checked.
O : Checks 4th axis 1st inhibit area stored stroke limit.
1: 4th axis 1st inhibit area stored stroke limit not checked.
O : Checks Z-axis
inhibit area stored stroke limit.
1: Z-axis 1st inhibit area stored stroke limit not checked.
O : Checks Y-axis
inhibit area stored stroke limit.
Y-axis 1st inhibit area stored stroke limit not checked.
O : Checks X-axis
inhibit area stored stroke limit.
1: X-axis 1st inhibit area stored stroke limit not checked.
Parameter No.
N A M E
(Bit No.
7
6
5
4
3
2
o
)
– 2 9 6 –
Advertising