Error description, Example – Yaskawa MotionWorks IEC Toolboxes User Manual
Page 572
Yaskawa Toolbox: Function Blocks
MotionWorks IEC61131-3 Toolboxes: 2013-09-13
559
be scaled.
V
CalY2
LREAL
Datapoint specifying a line along which data is to
be scaled.
LREAL#0.0
VAR_OUTPUT
B
Valid
BOOL
Indicates that the outputs of the function are valid.
V
Output
LREAL
The result of the calculation y:=mx + b.
V
m
LREAL
The calculated slope of the line.
V
b
LREAL
The calculated intercept of the line.
B
Error
BOOL
Set high if error has occurred during the execution of the function
block. This output is cleared when 'Execute' or 'Enable' goes low.
B
ErrorID
UINT
If Error is true, this output provides the Error ID. This output is reset
when 'Execute' or 'Enable' goes low.
Error Description
ErrorID
Meaning
No error
Calibration Error: Cal_X2 must be greater than Cal_X1
Example