Using the panel operator – Yaskawa Large Capacity Sigma II Series User Manual

Page 274

Advertising
background image

6 Using the Digital Operator

6.2.12 Password Setting (Write Prohibited Setting)

6-54

Using the Panel Operator

1. Press the MODE/SET Key to select the auxiliary function mode.

2. Press the Up or Down Cursor Key to select the parameter Fn010.

3. Press the DATA/SHIFT Key for a minimum of one second. The following display will

appear.

4. Input the password (0001) and press the MODE/SET Key. The display will change to

one shown below and the password will be registered.

5. Press the DATA/SHIFT Key for a minimum of one second to return to the auxiliary

function mode display.

This completes the procedure for setting the password. The newly set password will become
valid from the next power ON.

MODE/SET

DATE/

Flashing for
one second

Advertising
See also other documents in the category Yaskawa Equipment: