18 cables for connecting pcs to a servopack – Yaskawa Large Capacity Sigma II Series User Manual
Page 337

7.5 Specifications and Dimensional Drawings for Peripheral Devices
7-61
7
7.5.18 Cables for Connecting PCs to a SERVOPACK
Special cables for connecting a PC to a SERVOPACK. Using these cables allows monitoring
and setting of parameters with a PC.
PC software is available for these communications. Contact your Yaskawa representative for
details. Operate the software as described in the manual supplied.
D-Sub, 25-pin Connector Cable
Connecting a Personal Computer to a SERVOPACK
Cable Configuration
Communications Specifications
The communications specifications are as follows:
• Baud Rate:
9600 bps
• Number of Bits
Start: 1 bit
Data: 7 bits
Stop: 1 bit
Parity: 1 bit (even)
• Synchronization:
Start-Stop
• XON/XOFF Control:
None
• Shift Control:
None
• Communications Method: Semi-duplex
Rear of the personal computer
SERVOPACK
CN3
Cable model: JZSP-CMS01
Cable
CN8
BATTERY
Ver.
CHARGE
MODE/SET
YASKAWA
SERVOPACK 400V
SGDH-
DATE/
POWER
CN5
D-Sub Connector
17JE-23250-02 (D8A)
Daiichi Denshi Kogyo
Co., Ltd.
2-M2.6
screws
2000 (78.74)
±50 (1.97)
2-M2.6
screws
Half-pitch connector
Plug: 10114-3000VE
Shell: 10314-52A0-008
Sumitomo 3M Co., Ltd.