Yaskawa Large Capacity Sigma II Series - Manual (Page 32)

2.2 Installation
2-5
2
2.2 Installation
This section describes how to check Σ-II Series products on delivery and how to install them.
2.2.1 Checking on Delivery
Check the following items when Σ-II Series products are delivered.
If any of the above items are faulty or incorrect, contact your Yaskawa sales representative
or the dealer from whom you purchased the products.
„ Servomotors
External Appearance and Nameplate Examples
Check Items Comments
Are the delivered products the ones
that were ordered? Check the model numbers marked on the nameplates of the servo-
motor and SERVOPACK. (See the following.)
Does the servomotor shaft rotate
smoothly? The servomotor shaft is normal if it can be turned smoothly by
hand. Servomotors with brakes, however, cannot be turned manu-
ally.
Is there any damage? Check the overall appearance, and check for damage or scratches
that may have occurred during shipping.
Are there any loose screws? Check screws for looseness using a screwdriver.
Munufacturing date
Serial number
Servomotor model
Rated output
Rated rotation speed
(Example)
SGMBH
servomotor
AC SERVO MOTOR
TYPE SGMBH - 2BDCA
kw N
.
m
min
SER.NO.
A
RATING
DATE
22 140
1500 58
CONT.
K7A500 101 - 004
9708
ENCODER
UTMAH - B12BDYR11
17 bit
YASKAWA ELECTRIC CORPORATION
JAPAN
-1