Oki MC363dn User Manual
Page 124
![background image](/files/858120/content/doc124.png)
7. Registering and Managing Devices
- 124 -
2
Select the device from which to acquire
the job log in [Device].
3
Click in [Log/Access Control] to open
the settings window.
4
Check [Enable access control.] in [Access
Control], and specify [Panel Access
Control] and [User Auth. Method].
[Panel access control]
[User Name/Password]
A user name and password are entered
when logging in from the panel of the
device.
[PIN]
A PIN ID is entered when logging in from
the panel of the device.
[Do not specify]
The default method of the device is used
when logging in from the panel of the
device.
[Invalidity]
It is possible to disable the panel access
control of the device and use the print
restriction function.
[User Auth. Method]
[User Name/Password]
This is enabled if [User Name/Password]
is set in [Panel access control]. Specify a
method from [Local], [LDAP] and [Secure
Protocol].
[Email printing use]
Sets the email print restrictions.
[Color]
Allows color and monochrome printing.
[Mono]
Prohibits color printing, prints in
monochrome.
[Invalidity]
Prohibits color and monochrome printing.
[Google Cloud Print use]
Sets restrictions for printing with Google Cloud
Print.
[Color]
Allows color and monochrome printing.
[Mono]
Prohibits color printing, prints in
monochrome.
[Invalidity]
Prohibits color and monochrome printing.
[Guest use]
Enables/disables guest user settings. Check to
enable [Guest authority settings] and specify
usable functions.
[Specify schedule to acquire device use
restrictions.]
Set the schedule to which usage restrictions
registered in the device are acquired. When
updates are detected, information in this
software is updated with settings from the
device.
Enabled when [Enable access control] is
checked.
[Specify Interval]
Acquired for each set interval. The maximum
interval time that can be set is 24 hours.
[Time specified]
Set the specific time. Click [Specify Time] and
add the time. Up to 24 acquisition times can be
added. After adding, click [OK].