Appendix – Areca ARC-8050T3U 6-Bay Thunder3 Desktop RAID Storage Array User Manual
Page 129
129
APPENDIX
The firmware-embedded SNMP agent manager monitors all
system events and the SNMP function becomes functional
with no agent software required. When you open the "SNMP
Configuration" link, you will see the following settings:
1.
SNMP Trap Configurations
Enter the SNMP Trap IP Address.
2.
SNMP System Configurations
Community name acts as a password to screen accesses to the
SNMP agent of a particular network device. Type in the com-
munity names of the SNMP agent. Before access is granted to
a request station, this station must incorporate a valid com-
munity name into its request; otherwise, the SNMP agent will
deny access to the system. Most network devices use “pub-
lic” as default of their community names. This value is case-
sensitive. The system Contact, Name and Location that will be
shown in the outgoing SNMP trap.
3.
SNMP Trap Notification Configurations
Please refer to
Appendix D
of Event Notification Configurations.