Areca ARC-8050T3U 6-Bay Thunder3 Desktop RAID Storage Array - Manual (Page 139)

139
APPENDIX
<a> If enable --> disable, clear SED Key saved in setup
<b> If disable --> enable, if key exists, save to setup
If you setup from enable--->disable, the key will not remain in
the flash. So that next time power up again, it will need to input
the key from the CLI or McRAID manager again. The controller
volume will be in the lock stage. It will be not available to the
OS.
After your run the CLI to upload the key, volume will be unlocked
and available to the OS. You can also import the key file (Import
Security Key) or keyin the password (Enter SED Key By User
Password) from the GUI interface.
(1) Import Security Key
(2) Enter SED Key By User Password