Areca ARC-8050T3U 6-Bay Thunder3 Desktop RAID Storage Array - Manual (Page 48)

INSTALLATION
48
Note:
“For Windows, Install Driver First”
For Windows PC: the Thunderbolt certified device driver
must be installed before plugging in the device for it to
function properly.
10. The ArcHTTP and CLI are installed at the same time on ARC-
8050T3. Once ArcHTTP and CLI have been installed, the Arc-
HTTP background task automatically starts each time when
you start your computer. There is one MRAID icon showing
on your “Programs” folder. This icon is for you to start up
the McRAID storage manager (by ArcHTTP) and CLI utility. If
you have not yet installed the hardware, please follow the
“2.4.1 Physically Install RAID Storage and Drives” section to
install it. Otherwise, to begin the creation volume, go on the
“2.4.3.2 Configure RAID Volumes” section to configure the
volume.
2.4.3.2 Configure RAID Volumes
There are often multiple ways to accomplish the same configura -
tion and maintenance tasks for your RAID storage. Your ARC-
8050T3U RAID storage can be configured by one of the following
methods:
1. McRAID Storage Manager from ArcHTTP. (Thunderbolt port)
2. McRAID Storage Manager Through LAN port.
3. LCD Panel with Keypad.