Physio-Control LIFEPAK 20e - Manual (Page 111)

6
D
ata Mana
g
e
ment
Data Management
LIFEPAK 20e Defibrillator/Monitor Operating Instructions 6-3
©2006-2013 Physio-Control, Inc.
Figure 6-1 is an example of a CODE SUMMARY report. Press CODE SUMMARY to print the
report.
Figure 6-1 CODE SUMMARY Report
Preamble
The preamble contains patient information (name, event identification, patient identification,
location, age, and sex) and device information (date, time, and therapy information) as shown in
Figure 6-1 . The event identification is a unique identifier that the defibrillator automatically enters
in the ID field for each Patient Report. This identifier includes the date and time that the
defibrillator is turned on. The location field allows you to enter up to 25 alpha-numeric characters
to identify where the device was used. You can link the data you enter to other patient
information.
Event/Vital Signs Log
The LIFEPAK 20e defibrillator/monitor documents events and vital signs in chronological order.
Events are operator or device actions that are related to monitoring, pacing, AED therapy, data
transmission, and more.
Table 6-1 shows a complete listing of events that can be found in the
event log.
Vital signs (or active parameters) are entered into the log automatically every 5 minutes (or for
each event) and when alarm limits are exceeded. Refer to
AUTO LOG in Table 8-1 for more
information.
Preamble
Name: DAVIDO, GUIDO CODE SUMMARY™
ID 041495094322 critical event record
Patient ID: 52876004 Power On: 24 April 09 06:03:12
Location: L483 Device: 100
Age: 45 Sex: M Site: ABCD
Total Shocks: 3
Total time paced 00:15:00
Elapsed Time: 00:52:43
35.1 3434 LP20PRB005
Event/Vital Signs Log
Time Event HR SpO2•PR COMMENTS:
07:15:34 Power On
07:16:34 Initial Rhythm 95 99•95
07:20:34 Vital Signs 92 98•94
07:22:14 Pacing 1 Started 95 98•95
07:24:34 Pacing 2 Set 99 98•99
07:25:34 Vital Signs 92 98•93
07:26:36 Alarm HR 152 99