Physio-Control LIFEPAK 20e - Manual (Page 150)

Setup Options
8-14 LIFEPAK 20e Defibrillator/Monitor Operating Instructions
SET PASSCODES SETUP MENU
Use the Set Passcodes menu to change the factory default passcode of 0000 to some other
number. If you lose the setup passcode, contact the factory for assistance.
SERVICE MODE
The service mode contains tests and logs intended for service personnel. For specific
information concerning access to the service mode, refer to the LIFEPAK 20e Defibrillator/
Monitor Service Manual.
Table 8-21 Set Passcodes Setup Menu
Menu Item Help Message Options
SETUP MODE (The current passcode
appears.)
Set passcode to enter setup
mode Rotate the Speed Dial to select digits.
ARCHIVES
ACCESS Select passcode access for
archives mode NO PASSCODE, ARCHIVES ONLY,
DELETE ONLY, ARCHIVES/DELETE
.
ARCHIVES
MODE Set passcode to enter
archives mode. Rotate the Speed Dial to select digits.
DELETE
RECORDS Set passcode to delete
records in archives mode. Rotate the Speed Dial to select digits.