Entering setup options, Entering setup options -3 – Physio-Control LIFEPAK 20e User Manual
Page 139
8
S
etu
p
Opti
ons
Setup Options
LIFEPAK 20e Defibrillator/Monitor Operating Instructions
8-3
©2006-2013 Physio-Control, Inc.
ENTERING SETUP OPTIONS
Pressing
HOME SCREEN
after selecting a menu item returns you to the Setup screen.
To enter the Setup menu:
1 Press
ON
while holding down
OPTIONS
and
EVENT.
Continue to
hold these controls down until the
passcode screen appears.
2 Enter the passcode by scrolling
through the digits in the highlighted
fields.
3 Select the digit. The digit changes to
a dot to protect the passcode. If you
enter the correct digit, the next
number in line highlights
automatically.
When you have entered the
correct passcode, the setup
overlay appears.
If you enter the passcode
incorrectly, the message
PASSCODE INCORRECT—TRY
AGAIN
appears in the status
message area. You have three
chances to enter the passcode
correctly. Turn the power off and
on to start again.
Setup
Set up general device options
General...
Manual Mode...
AED Mode...
CPR Metronome...
Pacing...
Monitoring...
Events...
Alarms...
Printer...
Clock...
Self Test...
Reset Defaults...
Print Defaults...
Send Config...
Set Passcodes...
Service...