Physio-Control LIFEPAK 20e - Manual (Page 113)

6
D
ata Mana
g
e
ment
Data Management
LIFEPAK 20e Defibrillator/Monitor Operating Instructions 6-5
©2006-2013 Physio-Control, Inc.
Waveform events are preceded by a header that includes the following information:
• Patient data • Vital signs
• Event name • Device configuration information
• Therapy data • Transthoracic impedance measured during the shock
(defibrillation events only)
CODE SUMMARY Format
You can configure the LIFEPAK 20e defibrillator/monitor to print a CODE SUMMARY report in
one of the formats described in
Table 6-3 . CODE SUMMARY reports are always stored in the
medium format.
The format determines only which reports are printed when the CODE SUMMARY button is
pressed. If you interrupt printing of a CODE SUMMARY report, the entire CODE SUMMARY
report will be reprinted when printing is resumed.
CODE SUMMARY Complete is printed immediately following the last waveform event.
Table 6-3 CODE SUMMARY Formats
Format Attributes
Medium format • Preamble
• Event/vital signs log • Event waveforms
Short format • Preamble • Event/vital signs log