Physio-Control LIFEPAK 20e - Manual (Page 35)

2
B
asic Orien
tation
Basic Orientation
LIFEPAK 20e Defibrillator/Monitor Operating Instructions 2-13
©2006-2013 Physio-Control, Inc.
Changing Printer Paper
Loading 50 mm Paper
The printer is equipped with an out-of-paper sensor to protect the printhead. The sensor
automatically turns off the printer if paper runs out or if the printer door is open.
To load the paper:
1 Press the black button to open the printer door.
2 Remove the empty paper roll.
3 Insert the new paper roll, grid facing upward.
4 Pull out a short length of paper.
5 Push the printer door in to close.
Figure 2-15 illustrates the steps for loading 50 mm paper.
Figure 2-15 Printer
CAUTION!
Possible printer malfunction.
Using other manufacturers’ printer paper may cause the printer to function improperly and/or
damage the print head. Use only the printer paper specified in these operating instructions.