Physio-Control LIFEPAK 20e - Manual (Page 49)

3
M
o
n
itoring
Monitoring
LIFEPAK 20e Defibrillator/Monitor Operating Instructions 3-3
©2006-2013 Physio-Control, Inc.
You can select or change the ECG size by using the SIZE button or the Speed Dial. If an ECG is
in Channel 2, the size is automatically changed to match the Channel 1 size.
To select or change the ECG size using the Speed Dial:
Adjusting the Systole Tone Volume
To adjust the systole tone volume, highlight and select heart rate (HR) in the monitoring area of
the screen.
The following overlay appears:
To select or change the ECG lead using
the Speed Dial:
1 Highlight and select
CHANNEL 1 , and
then select LEAD to obtain the
primary ECG lead choices.
2 Change the ECG lead by rotating the
Speed Dial. The highlighted selection
shows the ECG lead.
3 Repeat Step 1 and Step 2 to select or
change displayed waveforms for
Channel 2.
To select or change the ECG size using
the
SIZE button:
1 Press the SIZE button.
2 When the Size menu appears, press
the SIZE button again. The
highlighted selection shows the
current ECG size.
1 To obtain the primary ECG, highlight
and select CHANNEL 1 , and then
select SIZE .
2 Change ECG size by rotating the
Speed Dial. The highlighted selection
shows the current ECG size.
1 Rotate the Speed Dial to the desired
volume.
2 Press the home screen to exit.