Service and repair, Product recycling information, Recycling assistance – Physio-Control LIFEPAK 20e User Manual
Page 134: Preparation, Recycling of disposable electrodes, Packaging, Warranty, Warranty -12
Maintaining the Equipment
7-12
LIFEPAK 20e Defibrillator/Monitor Operating Instructions
SERVICE AND REPAIR
If testing, troubleshooting, or a service message indicates the LIFEPAK 20e defibrillator/monitor
requires service, contact qualified service personnel. In the USA, call 1.800.442.1142. Outside
the USA, contact your local Physio-Control representative.
When calling Physio-Control to request service, identify the model and serial number and
describe the observation. If the device must be shipped to a service center or the factory, pack
the device in the original shipping container, if possible, or in protective packing to prevent
shipping damage.
The LIFEPAK 20e Defibrillator/Monitor Service Manual provides detailed technical information to
support service and repair by qualified service personnel.
PRODUCT RECYCLING INFORMATION
All materials should be recycled according to national and local regulations. Contact your local
Physio-Control representative for assistance or refer to www.physio-control.com/recycling for
instructions on disposing of this product.
Recycling Assistance
The defibrillator and its accessories should be recycled according to national and local
regulations. Contact your local Physio-Control representative for assistance.
Preparation
The device should be clean and contaminant-free prior to being recycled.
Recycling of Disposable Electrodes
After using disposable electrodes, follow your local clinical procedures for recycling.
Packaging
Packaging should be recycled according to national and local regulations.
WARRANTY
To obtain a detailed warranty statement, contact your local Physio-Control representative or go
to www.physio-control.com.
WARNINGS!
Shock hazard.
Do not disassemble the defibrillator. It contains no operator serviceable components and
dangerous high voltages may be present. Contact qualified service personnel for repair.
Possible ineffective energy delivery.
Service mode is for authorized personnel only. Improper use of service mode may
inappropriately alter the device’s configuration and may change energy output levels. Contact
qualified service personnel for assistance or information about device configuration.