Physio-Control LIFEPAK 20e - Manual (Page 146)

Setup Options
8-10 LIFEPAK 20e Defibrillator/Monitor Operating Instructions
Waveform Sets Setup Menu
CO
2
Setup Menu
EVENTS SETUP MENU
Use the Events Setup menu to configure or create user-annotated events. When you select a
menu item, the screen displays a help message.
Table 8-12 Waveform Sets Setup Menu
Menu Item Help Message Options*
CHANNEL 1 Select waveform for Channel 1 PADDLES, ECG LEAD I, ECG LEAD II,
ECG LEAD III, (AVR, AVL, AVF, C
)
CHANNEL 2 Select waveform for Channel 2 NONE , CASCADING ECG, PADDLES,
ECG LEAD I, ECG LEAD II, ECG LEAD III,
(AVR, AVL, AVF, C), SPO2, CO2
*Only available leads appear as options.
Table 8-13 CO
2
Setup Menu
Menu Item Help Message Options*
UNITS Set up CO2 units of measure mmHg, %, kPa
BTPS Apply body temperature
correction factor to EtCO2
value ON or OFF
Table 8-14 Events Setup Menu
Menu Item Help Message Options
EVENTS PAGE 1 Select events for Page 1 Select events 2 to 9 from a preset list.
EVENTS PAGE 2 Select events for Page 2 Select events 10 to 18 from a preset list.
CUSTOM
EVENTS Create custom events to use
in event screen Create up to 16 event names to include in
the preset list.
Resetting to defaults will delete the
custom list.