ADC CUDA 3 - Manual (Page 189)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Configuring SNMP Event Notification Types 187
The following table describes the parameters that you set to configure
notifications:
Table 9-8 Parameters Contained in Event Notification Configuration
Parameter Description
Host:Port The IP address and UDP port number
on which the SNMP host is configured
to receive traps. The UDP port range is
1 to 65535 and the default is 162.
Timeout The amount of time, in seconds, that
passes before it is assumed the host
did not receive the inform notification
message. The range is 0 to 9999 and
the default is 15.
Retry The number of retries made when a
response to a generated inform
message is not received. The range is 0
to 255 and the default is 3.
Notify or Community Indicates whether the SNMP host
receives a trap or an inform
notification message, or indicates the
name of the community used to
access the host
■
A trap is any message generated
that contains unconfirmed PDUs.
You may receive PDU traps for
security models v1, v2c, and v3.
■
An inform is any message
generated that contains confirmed
PDUs. You may receive informs for
only v2c and v3 security models.