Dhcp relay commands – ADC CUDA 3 User Manual
Page 574
ADC Telecommunications, Inc.
572
A
PPENDIX
A: C
OMMAND
S
UMMARY
DHCP Relay Commands
Table A-7 DHCP Relay Commands
Command
Mode
Description
bootp-policy <index> {deny mac
<mac-address> [mask <mask>]... |
permit <ip-address>... mac
<mac-address> [mask <mask>]... }
[description <string>]
interface:cable:csi
Configures BOOTP policies on the
current interface.
dhcp-policy {<policy-number> |
default} {deny | permit}
{<ip-address> ... | forward-internal
[disable]} [agent-option {cm | cpe} |
cmmac <mac-address> | interface
<c/s/i> | mac <mac-address> [mask
<mask>]] [vendor-class-id {cm | mta}]
[description <string>]
interface:cable:csi
Configures DHCP policies on the
current interface. DHCP policies
dictate the servers to which DHCP
requests are forwarded.
dhcp-relay {enable | disable}
[cm-gateway <gi-address>]
[cpe-gateway <gi-address>]
[add-agent-options {enable |
disable}] drop-mismatch {enable |
disable}] [relay-mode {append |
replace | untouch | discard}]
[max-pkt-len <number>]
[mta-gateway <gi-address>]
[server <gi-address>]
interface:cable:csi
Configure DHCP relay options on
the current cable interface.
Note that you configure the DHCP
relay server using the
dhcp-policy
command.