ADC CUDA 3 - Manual (Page 479)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Managing Quality of Service 477
Viewing Service Flows
Perform the following tasks within interface:cable:csi <c/s/i> mode to view
Service Flow summaries, upstream Service Flows and Service Flow parameter
sets. Views may be defined for all Service Flows, for a specified Service Flow
and for a specified cable modem:
Task Command
1. View a summary of all Service
Flows or a specified SFID.
show modem [<mac address>]
service-flow [<sfid>]
2. View a summary of an upstream
Service Flow.
show modem [<mac address>]
service-flow [<sfid>] upstream
3. View parameter sets for all Service
Flows.
show modem service-flow
parameter-set
4. View Service Flow parameters sets
for a specified Service Flow or
cable modem.
show modem [<mac address>]
service-flow [<sfid>] parameter-set
5. View a specified parameter set.
Following are the values that you
enter for [param-type]:
■
To view an Active Service Flow
parameter set enter 1.
■
To view an Admitted Service
Flow parameter set enter 2.
■
To view a Provisioned Service
Flow parameter set enter 3.
show modem [<mac address>]
service-flow [<sfid>] parameter-set
[<param-type>]