ADC CUDA 3 - Manual (Page 584)

ADC Telecommunications, Inc.
582 A PPENDIX A: C OMMAND S UMMARY
Chassis Commands
Table A-12 Chassis Commands
Command Mode Description
aux-device backplane-clock-a {bits-a
| bits-b | internal | none | slot <c/s>
{enable | disable}} root Configures primary clock (A).
aux-device-backplane-clock-b {bits-a
| bits-b | internal | none | slot <c/s>
{enable | disable}} root Configures secondary clock (B).
boot {enabled | disabled | reset} slot
<c/s> slot Use this command to hard boot
the current module or disable the
module (bring it offline).
ccdown root Shuts down the management
module. Use this command only if
you have physical access to the
system.
chassis {description <string> | group
<group-name> | mcs {enable |
disable}} root Configures chassis group support.
chassis-config <chassis-number> root Configures the chassis ID for the
selected chassis. Valid range: 1–
128.
chassis-config <chassis-number>
clusterid <number> root Assigns the selected chassis to a
cluster.
chassis-config <chassis-number>
manager secondary root Configures the management
module as a primary or secondary
manager.
chassis-config <chassis-number>
scope {chassis | cluster} root Defines the management scope.
connect <ip-address> [password
<password>] [user <username>] root Connects you to another Cuda
12000.
db-check root Validates provisioning database
access information.
db-connect
<ldap-server-object-name>
<ldap-server-ip-address>
<ldap-server-port-number>
<ldap-server-username>
<ldap-server-password> root Configures provisioning
information.