ADC CUDA 3 - Manual (Page 529)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Browsing Cable Modem and MTA Status 527
For example, to display cable modem device status, you would issue the
following command:
cli:192.168.208.3:interface:cable:csi(1/1/1)# show modem
00:90:83:57:52:5b cm downstream
S l o t 1
MAC Address 00:90:83:57:52:5b
IP Address 172.30.1.13
docsIfDownChannelId 1
docsIfDownChannelFrequency 507000000
docsIfDownChannelWidth 6000000
docsIfDownChannelModulatio 3
docsIfDownChannelInterleav 5
docsIfDownChannelPower 3
docsIfDownChannelAnnex 4
The corresponding output from the cable modem’s MIB would be:
[email protected]> walk docsifdownstreamchanneltable
docsIfDownChannelId.3 Number: 1
docsIfDownChannelFrequency.3 Number: 507000000
docsIfDownChannelWidth.3 Number: 6000000
docsIfDownChannelModulation.3 Number: qam64 (3)
docsIfDownChannelInterleave.3 Number: taps32Increment4 (5)
docsIfDownChannelPower.3 Number: 3
docsIfDownChannelAnnex.3 Number: annexB (4)