Changing upstream channels – ADC CUDA 3 User Manual
Page 449
Advertising
Cuda 12000 IP Access Switch CLI-based Administration Guide
Changing Upstream Channels
447
Changing Upstream Channels
You can change the upstream channel that a cable modem is using by
changing the upstream channel ID for the specified modem.
To change the upstream channel, perform the following task in
interface
cable <c/s/i>
mode.
Task
Command
Modify the upstream channel ID for a
select modem.
cm modify upstream
<new-upstream-channel>
{<ip-address> | <mac-address> | <sid>}
Advertising