ADC CUDA 3 - Manual (Page 483)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Managing Quality of Service 481
The following table describes the parameters contained in viewing Service
Flow Classifiers:
Table 19-14 Parameters Contained in Viewing Service Flow Classifiers
Parameter Description
SFID The Service Flow Identifier.
CID Unique identifier for the packet classifier that the
CMTS assigns.
Direction Indicates the direction for the classifier.
Priority Indicates the order of evaluation for the classifiers. The
higher the value, the higher the priority.
A default value of zero is for provisioned Service Flow
classifiers.
A default value of 64 is for dynamic Service Flow
classifiers.
IP TOS Low Low value of a range of TOS byte values. If the
referenced parameter is not present in the classifier,
the value is zero.
IP TOS High High value of a range of TOS byte values. If the
referenced parameter is not present in the classifier,
the value is zero.
IP TOS Mask Mask value that ensures range checking of the TOS
Low and TOS High values.