ADC CUDA 3 - Manual (Page 238)

ADC Telecommunications, Inc.
236 C HAPTER 11: C REATING R OUTE F ILTERS
Creating RIP Export Route Maps
You can use RIP export route maps to permit or deny advertisement of routes
learned from non-RIP protocols. For example, you can choose not to
advertise select routes via RIP if they were manually added as static routes.
You can also choose to override the cost metric of advertised routes
originating for a non-RIP protocol. When there are multiple routes to the
same destination, the route with the lowest cost metric is preferred.
OSPF export route maps are created within router-rip export mode using the
route-map command. To create a RIP export route map, use this procedure:
Task Command
1. Enter router-rip mode. router rip
2. Enter export mode. export
3. Specify the route map or create a
new one if it does not already
exist.
route-map <map-tag> {permit | deny}