ADC CUDA 3 - Manual (Page 350)

ADC Telecommunications, Inc.
348 C HAPTER 16: N ETWORK -L AYER B RIDGING
To remove network-layer bridges, perform the following tasks within any
mode:
The follow example removes all bridge groups configured on the system:
cli:172.16.19.10:root# show bridge-group
Bridge Group: Bridge_1
Bridge Group: 5
cli:172.16.19.10:root# no bridge-group all
2 Bridge Groups have been deleted
cli:172.16.19.10:root#
Task Command
1. Remove a specified bridge group. no bridge-group <bridge-group>
2. Remove all currently configured
bridge groups.
no bridge-group all