ADC CUDA 3 - Manual (Page 502)

ADC Telecommunications, Inc.
500 C HAPTER 20: S UBSCRIBER M ANAGEMENT
The source matching criteria that you define for the global filter group is
used across the Cuda 12000 and is persisted on the Route Server. To
configure matching criteria for global filter groups, perform the following
tasks:
Task Command
1. Enter root mode. root
2. Create a Subscriber
Management filter group.
cm-filter <group number> <filter number>
{deny | permit} prot {any | tcp | udp |
<number>}
3. Specify the source IP
address and mask.
cm-filter <group number> <filter number>
{deny | permit} prot {any | tcp | udp |
<number>} [src <ip-address> <mask>]
4. Specify the destination IP
address and mask.
cm-filter <group number> <filter number>
{deny | permit} prot {any | tcp | udp |
<number>} [dest <ip-address> <mask>]
5. Specify the TOS value and
mask.
cm-filter <group number> <filter number>
{deny | permit} prot {any | tcp | udp |
<number>} [tos <tos-value> <mask>]
6. Specify the source TCP or
UDP port number.
cm-filter <group number> <filter number>
{deny | permit} prot {any | tcp | udp |
<number>} [src-port {any | <number>}]
7. Specify the destination
TCP or UDP port number.
cm-filter <group number> <filter number>
{deny | permit} prot {any | tcp | udp |
<number>} [dest-port {any | <number>}]
8. Specify the TCP flag and
TCP-flag-mask options.
cm-filter <group number> <filter number>
{deny | permit} prot {any | tcp | udp |
<number>} [tcp-flag {ack | fin | push | reset |
syn | urgent} tcp-flag-mask {ack | fin | push |
reset | syn | ask | urgent}]