ADC CUDA 3 - Manual (Page 394)

ADC Telecommunications, Inc.
392 C HAPTER 18: C ONFIGURING C ABLE M ODEM T ERMINATION S YSTEMS
Configuring Upstream Channel Parameters
Configuring upstream channel parameters is described in the following
sections.
Upstream shutdown
The Upstream shutdown parameter sets the state of the upstream channel.
Choose Up to set the channel active, or choose Down to set the channel
inactive.
You set the upstream channel status by performing the following tasks.
Task Command
1. Enter interface cable mode. interface cable <c/s/i>
2. Set the upstream channel
status to up.
or
Set the upstream channel
status to down.
upstream <port number> no shutdown
upstream <port number> shutdown