ADC CUDA 3 - Manual (Page 447)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Resetting Cable Modems 445
Example
The following example displays the modems attached to cable interface
1/1/1. The administrator uses the match argument to reset all modems with
the vendor ID: 00:90:96.
cli:interface:cable:csi(1/1/1)# show modem
row count: 11
MAC Address IP Address SID CID CPE D:U Power Timing Modem
(dbMV) State
----------------- --------------- ---- ---- --- --- ------ ------ -------
00:90:96:00:29:6d 201.1.1.103 453 1 0 1:2 0 2217 Registered
00:10:95:01:ef:d8 201.1.1.100 654 1 0 1:2 0 2209 Registered
00:10:95:04:0a:c4 201.1.1.102 63 1 0 1:2 0 2729 Registered
00:90:96:00:39:f9 201.1.1.101 68 1 0 1:2 0 2220 Registered
00:10:95:04:0a:b7 201.1.1.105 64 1 0 1:2 0 2727 Registered
00:90:96:00:29:71 201.1.1.104 66 1 0 1:2 0 2222 Registered
00:10:95:04:0a:bd 201.1.1.106 61 1 0 1:2 -2 2729 Registered
00:10:95:01:f0:05 201.1.1.107 75 1 0 1:2 0 2214 Registered
00:90:83:36:82:f1 201.1.1.110 73 1 0 1:2 0 1234 Registered
00:90:83:32:9f:8c 201.1.1.111 70 1 0 1:2 0 1657 Registered
00:10:95:04:0a:c3 0.0.0.0 62 0 0 1:2 -8 2730 Ranging
cli:interface:cable:csi(1/1/1)# cm reset 00:90:96:ff:ff:ff match
Resetting Cable Modem with Mac Address: 00:90:96:00:29:6d
Resetting Cable Modem with Mac Address: 00:90:96:00:39:f9
Resetting Cable Modem with Mac Address: 00:90:96:00:29:71