ADC CUDA 3 - Manual (Page 436)

ADC Telecommunications, Inc.
434 C HAPTER 19: M ANAGING C ABLE M ODEMS
Displaying a Detailed Listing for an Interface
You can display a list of cable modems attached to a specific cable interface
and their associated status. To do so, perform the following tasks:
Example
The following example shows the result of the show modem command
within cable interface configuration mode to display a list of attached
modems:
cli:192.168.208.3:interface:cable:csi(1/1/1)# show modem
row count: 12
MAC Address IP Address SID CID CPE D:U Power Timing Modem
(dbMV) State
----------------- --------------- ---- ---- --- --- ------ ------ ----------
00:90:96:00:29:71 201.1.1.112 1 1 0 1:2 0 2216 Registered
00:90:83:36:82:ee 201.1.1.108 2 0 0 1:2 0 1240 RegBpiTek
00:90:96:00:29:6d 201.1.1.104 3 1 0 1:2 0 2216 Registered
00:10:95:04:0a:b7 201.1.1.109 4 1 0 1:2 0 2726 Registered
00:90:96:00:39:f9 201.1.1.101 5 1 0 1:2 0 2212 Registered
00:10:95:01:ef:d8 201.1.1.100 6 1 0 1:2 0 2208 RegFailBad
00:10:95:04:0a:c3 0.0.0.0 7 57 0 1:2 -9 2724 Ranging
00:90:96:00:39:7f 201.1.1.102 8 1 0 1:2 0 2219 Registered
00:10:95:04:0a:c4 201.1.1.110 9 1 0 1:2 0 2724 Registered
Task Command
1. Enter this command from within
root mode or interface mode to
display all cable modems on a
specific interface.
show interface cable <c/s/i> modem
2. Enter this command from within
cable interface mode to display all
cable modems on the current
interface.
show modem