ADC CUDA 3 - Manual (Page 70)

ADC Telecommunications, Inc.
68 C HAPTER 3: M ANAGING U SER A CCOUNTS
Configuring Local Authentication
By default, users are authenticated locally by the Cuda 12000 using the
accounts and access profiles you create as described earlier in this chapter. If
you configure TACACS+ or RADIUS authentication, and then decide to
change back to local authentication, perform the following tasks:
Example
cli:192.168.208.3:root# aaa authentication login default local
cli:192.168.208.3:root# show aaa
aaa authentication login default local
Task Command
1. Enter root mode. root
2. Enable local authentication. aaa authentication login default local
3. Verify that local authentication is
enabled.
show aaa