ADC CUDA 3 - Manual (Page 579)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Cable Modem and Subscriber Administration Commands 577
Cable Modem and Subscriber Administration Commands
Table A-9 Cable Modem and Subscriber Administration Commands
Command Mode Description
clear service-flow log <all> interface:cable:csi Clears Service Flow logs.
cm-filter <group-number>
<filter-number> {deny | permit} prot
{any | tcp | udp | <number>} [src
<ip-address> <mask>] [dest
<ip-address> <mask>] [tos
<tos-value> <mask>] [src-port {any |
<number>}] [dest-port {any |
<number>}] [tcp-flag {ack | fin | push
| reset | syn | urgent} tcp-flag-mask
{ack | fin | push | reset | syn | urgent}] Any Creates a packet filter for
upstream or downstream cable
modem or CPE traffic.
cm-filter-default cm downstream
<group-id> Any Specifies the default downstream
filter group for cable modems.
cm-filter-default cm upstream
<group-id> Any Specifies the default upstream
filter group for cable modems.
cm-filter-default cpe downstream
<group-id> Any Specifies the default downstream
filter group for CPE devices.
cm-filter-default cpe upstream
<group-id> Any Specifies the default upstream
filter group for CPE devices.
cm-offline clear interface:cable:csi Flushes all offline modems on the
current interface from the CMTS
tables.
cm-offline persist interface:cable:csi Enables the CMTS to maintain
statistics for a cable modem after
the modem goes offline.
cm-offline timer <number> interface:cable:csi Specifies the number of days that
the CMTS tracks offline cable
modems.
cm cpe-reset {<ip-address> |
<mac-address> | <sid>} interface:cable:csi Clears the CPE IP addresses that
the CMTS has learned for the cable
modem.
cm modify active {<ip-address> |
<mac-address> | <sid>} interface:cable:csi Enables the ability of the CMTS to
perform subscriber management
of devices associated with the
specified cable modem.