ADC CUDA 3 - Manual (Page 393)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Configuring Upstream Channels 391
Example
cli:172.16.19.10:root# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:172.16.19.10:interface:cable:csi(1/1/1)# show upstream 1
Upstream Channel Id 1 / 1 / 3 / 2
Center Frequency 20.0 (MHz)
Channel Width 3.2 (MHz)
Slot Size 2 (uSec)
Receive Power 0 (1/10 dBmV)
Modulation Profile 1
Tx Timing Offset 1496
Tx Backoff Start 5
Tx Backoff End 10
Ranging Backoff Start 2
Ranging Backoff End 3
Admin Status up
Operational Status up
Stats:
In Octets 346263
In Unicast Packets 7281
In Multicacast Packets 0
In Broadcast Packets 0
In Errors 0
In Discards 0
Signal Quality:
packets error-free 8267
corrected 0
uncorrected 0
Signal Noise 329 (dB)
Microreflections 11
cli:172.16.19.10:interface:cable:csi(1/1/1)#
4. Enter this command within cable
interface mode to display
parameters and statistics for a
specific upstream channel on the
current cable interface.
show upstream <port number>
Task Command