Downstream transmit-power – ADC CUDA 3 User Manual
Page 386
Advertising
ADC Telecommunications, Inc.
384
C
HAPTER
18: C
ONFIGURING
C
ABLE
M
ODEM
T
ERMINATION
S
YSTEMS
Downstream transmit-power
The Downstream transmit-power (TenthdBmV) parameter sets the nominal
output transmit power level. By default, Channel Power is set at 550
TenthdBmV. Acceptable values: 0–650.
You set the downstream output transmit power level by performing the
following tasks.
Task
Command
1. Enter interface cable mode.
interface cable <c/s/i>
2. Set the output transmit power
level.
downstream transmit-power
<0..650>
Advertising