ADC CUDA 3 - Manual (Page 314)

ADC Telecommunications, Inc.
312 C HAPTER 14: C ONFIGURING IP
Removing OSPF from IP Interfaces
You remove OSPF from an interface by performing the following tasks:
For more information on these commands, refer to the Cuda 12000 IP
Access Switch CLI Reference Guide.
Task Command
1. Enter configuration mode for the
interface from which you want to
remove OSPF.
interface <c/s/i>
2. Enter the IP address of this
interface.
ip address <ip-address> <mask>
3. Remove OSPF from the interface. no ip ospf area-id <area-id>