ADC CUDA 3 - Manual (Page 52)

ADC Telecommunications, Inc.
50 C HAPTER 2: A BOUT THE C OMMAND L INE I NTERFACE
IP Interface Mode
IP interface mode allows for the administration of a specified IP interface,
including IP interface-specific configuration and information displays. To
enter this mode, you must:
1. Enter physical interface mode for the physical interface associated with
the IP interface.
2. Issue the ip address command. On the command line, you specify the IP
address and network mask combination that identifies the IP interface.
In IP address mode, the following commands are available:
■
All commands that are available in the associated physical interface mode
(DOCSIS, Ethernet, or POS).
■
Commands for configuring RIP and OSPF on the interface (ip rip
commands and ip ospf commands).