Cable modem and mta command output descriptions – ADC CUDA 3 User Manual
Page 530
ADC Telecommunications, Inc.
528
C
HAPTER
21: MIB B
ROWSING
Cable Modem and MTA Command Output Descriptions
Table 21-4 docsIfCmMacTable Parameters
Table 21-5 docsIfCMServiceTable Parameters
CLI Output
Description
docsIfCmCmtsAddress
MAC address of the CMTS that is believed to
control this MAC domain. At the cable
modem, this the source address from the
SYNC, MAP, and other MAC-layer messages.
If the CMTS is unknown, this value is
00-00-00-00-00-00.
docsIfCmCapabilites
Capabilities of the MAC implementation at
this interface.
docsIfCmRangingRespTimeout
Waiting time for a ranging response packet.
docsIfCmRangngTimeout
Waiting time for a ranging timeout packet.
CLI Output
Description
docsIfCmServiceQoSProfile
Indicates the QoS attributes that associate with
this particular service. A value of zero indicates
no associated profile.
docsIfCmServiceTXSlotsImme Number of upstream mini-slots that were used
to transmit data PDUs in immediate contention
mode. This includes only PDUs that are
presumed to have arrived at the headend. It
does not include re-transmission attempts or
mini-slots used by Requests.
docsIfCmServiceTx SlotsDed
Number of upstream mini-slots that are used to
transmit data PDUs in dedicated mode. For
example, as a result of a unicast data grant.
dosIfCmServiceTXRetries
Number of attempts to transmit data PDUs
containing requests for acknowledgement that
did not result in acknowledgement.
docsIfCmServiceTxExceededs
Number of data PDUs transmission failures due
to excessive retries without acknowledgement.
docsIfCmServiceRqRetries
Number of attempts to transmit bandwidth
requests that did not result in
acknowledgement.