Sync interval (millisec), Ucd-interval – ADC CUDA 3 User Manual

Page 377

Advertising
background image

Cuda 12000 IP Access Switch CLI-based Administration Guide

Configuring the MAC Interface

375

Sync Interval (millisec)

The Sync Interval parameters sets the time interval between the CMTS
transmission of SYNC messages. By default, the SYNC message is sent by the
MAC hardware every 5 milliseconds. Acceptable values are 1 to 200
milliseconds.

You set the sync interval by performing the following tasks.

UCD-Interval

The UCD (Upstream Channel Descriptor) Interval sets the time interval
between CMTS transmission of Upstream Channel Descriptor for each active
upstream channel. By default, the UCD is sent every 2000 milliseconds.
Acceptable values are 1 to 2000 milliseconds.

Task

Command

1. Enter interface cable mode.

interface cable <c/s/i>

2. Configure the CMTS ranging sync

interval.

sync-interval <value>

Task

Command

1. Enter interface cable mode.

interface cable <c/s/i>

2. Configure the CMTS ranging UCD

interval.

ucd-interval <value>

Advertising