ADC CUDA 3 - Manual (Page 49)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Command Modes 47
cm First element in various cable modem and subscriber
management commands, such as cm modify active,
cm reset, and so on.
cm-filter Creates a cable modem filter.
cm-offline Configures several offline cable modem parameters for
the current interface.
dhcp-authority Adds a DHCP authority range. The command also
enables and disables DHCP authority.
dhcp-policy Configures several parameters in the DHCP packet and
determines the list of servers to which the DHCP
packet is sent.
dhcp-relay Configures various DHCP relay agent options, such as
the IP addresses of cable modem, CPE, and MTA
gateways.
downstream Configures the downstream channel.
flap-list Controls the size of the flap list.
insertion-interval Configures the modem insertion interval.
link-trap Enables link traps for the interface.
map-timer Configures the map timer interval.
modulation-profile Configures modulation profiles, which contain burst
properties for upstream data channels.
periodic-ranging-
interval Configures how the interface periodically invites
modems to range.
plant-delay Configures the estimated plant propagation delay.
pll-state Configures the phase lock loop state for the interface.
privacy Configures BPI plus parameters for the interface.
proxy-arp Enable proxy ARP on the interface.
qos Enables SNMP and cable modem access to the QoS
tables on the CMTS.
ranging-attempts Configures the number of times that a cable modem is
invited to range before being removed from the
system.
shared-secret Configures a shared secret on the current CMTS
interface.
shutdown Enables you to administratively shut down an interface.
Table 2-3 DOCSIS Interface Mode Commands
Command Description