ADC CUDA 3 - Manual (Page 33)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Introducing the Cuda 12000 IP Access Switch 31
Minimum Chassis Configuration
The minimum configuration of a Cuda 12000 IP Access Switch comprises the
following:
■
A minimum of one management module, plus the base software
package. The module and base software are required to configure the
Cuda 12000 IP Access Switch.
■
An Octal 10/100 Ethernet, Gigabit Ethernet, or POS module. Each of
these modules offers these services:
■
A link from the Cuda 12000 to your network backbone
■
May be configured as the route server
■
May function in a dual forwarding role
■
One DOCSIS or EuroDOCSIS application module, which is required to
perform CMTS functions.