ADC CUDA 3 - Manual (Page 542)

ADC Telecommunications, Inc.
540 C HAPTER 21: MIB B ROWSING
Table 21-13 docsBpi2CmBaseTable Parameters
CLI Output Description
docsBpi2CmPrivacyEnable Indicates if the cable modem is
provisioned to run Baseline Privacy Plus.
docsBpi2CmPublicKey Indicates the DER-encoded RSAPublicKey
ASN.1 type string, as defined in the RSA
Encryption Standard (PKCS #1) [10],
corresponding to the public key of the
cable modem. The 74, 106, 140, 204, and
270 byte key encoding lengths correspond
to 512 bit, 768 bit, 1024 bit, 1536 bit, and
2048 public moduli respectively.
docsBpi2CmAuthState
The options are:
State of the cable modem authorization
Finite State Machine (FSM).
Start FSM is in its initial state.
authwait The cable modem has received the
“Provisioned” event, indicating that it has
completed RF MAC registration with the
CMTS. In response to receiving the event,
the cable modem has sent both an
Authentication Information and an
Authorize Request message to the CMTS
and is waiting for the reply.
Authorized The cable modem has received an
Authorization Reply message which
contains a list of valid SAIDs for this cable
modem. At this point, the modem has a
valid Authorization Key and SAID list.
Transition into this state triggers the
creation of on TEK FSM for each of the
cable modem’s privacy-enabled SAIDs.
ReauthWait The cable modem has an outstanding
re-authorization request. The cable
modem was either about to time out its
current authorization or received an
indication (an Authorization Invalid
message from the CMTS) that its
authorization was no longer valid. The
cable modem sent an Authorization
Request message to the CMTS and is
waiting for a response.