ADC CUDA 3 - Manual (Page 51)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Command Modes 49
Table 2-5 POS Interface Mode Commands
Command Description
access-class Applies an access list to the current interface.
access-list Creates an access list, which consists of IP filtering
rules.
arp Sets the ARP timeout parameter.
bootp-policy Defines BOOTP request policies.
clock-source Configures the SONET transmission clock source.
crc Configures cyclic redundancy checking (CRC).
dhcp-authority Adds a DHCP authority range. The command also
enables and disables DHCP authority.
dhcp-policy Configures several parameters in the DHCP packet and
determines the list of servers to which the DHCP
packet is sent.
dhcp-relay Configures DHCP relay agent options.
link-trap Enables link traps for the interface.
loop Configures the current interface for loopback testing.
mtu Configures the maximum transmission unit (MTU) for
the current interface.
pos Configures POS parameters.
ppp Configures PPP parameters.
shutdown Enables you to administratively shut down an interface.