Frequency hopping statistics – ADC CUDA 3 User Manual
Page 418
ADC Telecommunications, Inc.
416
C
HAPTER
18: C
ONFIGURING
C
ABLE
M
ODEM
T
ERMINATION
S
YSTEMS
Frequency Hopping Statistics
Frequency Hopping also provides statistics for you to monitor the condition
of your plant. Within interface:cable:csi mode you may view these
statistics. You can display statistics for all policies on a single channel or all
channels:
■
Error Rate: The percentage of errors.
■
Error Count: The number of frames with errors.
■
Total Packets: The total number of frames received for each policy.
You display statistics for all policies on a single channel by performing the
following tasks:
You display statistics for all policies on all channels by performing the
following tasks:
Task
Command
1. Enter cable interface mode.
interface cable <c/s/i>
2. Display statistics to monitor the
condition of your plant.
show spectrum-group stats
upstream <port number>
Task
Command
1. Enter cable interface mode.
interface cable <c/s/i>
2. Display statistics to monitor the
condition of your plant.
show spectrum-group stats
upstream