ADC CUDA 3 - Manual (Page 440)

ADC Telecommunications, Inc.
438 C HAPTER 19: M ANAGING C ABLE M ODEMS
Displaying Specific Cable Modems
You can display selected modems by MAC address. To do so, perform the
following tasks:
Example
cli:192.168.208.3:interface:cable:csi(1/1/1)# show modem 00:90:83:32:9f:8c
S l o t 1
MAC Address 00:90:83:32:9f:8c
IP Address 201.1.1.110
SID 12
CID 1
CPE 0
D:U 1:2
Power 0 (dbMV)
Timing 1652
Modem State Registered
Task Command
1. Enter this command within root
mode or interface mode to display
a modem for a specified interface.
show interface cable <c/s/i> modem
<mac-address>
2. Enter this command within
interface mode to display a
specified modem connected to
the current cable interface.
show modem <mac-address>