ADC CUDA 3 - Manual (Page 445)

Cuda 12000 IP Access Switch CLI-based Administration Guide
Resetting Cable Modems 443
Resetting Cable Modems
The Cuda lets you reset a single modem or multiple modems attached to the
same cable interface. You can specify the modem that you want to reset in
terms of its IP address, MAC address, or Service Identifier (SID).
Use the cm reset command within interface cable <c/s/i> mode to reset cable
modems.
Resetting a Single Modem
To reset a single modem, perform the following task within interface cable
<c/s/i> mode:
Example
The following example shows the results of the cm reset command when
you reset a single modem with the MAC address 00:90:83:31:ac:ad:
Task Command
Reset a single modem cm reset {<ip-address> |
<mac-address> | <sid>}
cli:172.16.19.10:root# interface cable 1/1/1
mode: interface:cable:csi(1/1/1)
cli:172.16.19.10:interface:cable:csi(1/1/1)# cm reset 00:90:83:32:9f:8c
Reseting Cable Modem4316 with Mac Address: 00:90:83:32:9f:8c
cli:172.16.19.10:interface:cable:csi(1/1/1)#