SkyTrak 6036 Service Manual User Manual
Page 108
Cab and Covers
4.4
Model 6036 Legacy
4.3
OPEN CAB COMPONENTS
4.3.1
Seat/Seat Belt
a. Seat Removal
1. Park the vehicle on a firm, level surface. Level the
vehicle, ground the attachment, place the travel
select lever in the (N) NEUTRAL position, place the
neutral lock lever in the (N) NEUTRAL LOCK
position, engage the parking brake switch and shut
the engine OFF.
2. Place an Accident Prevention Tag on both the
ignition key switch and steering wheel, stating that
the vehicle should not be operated. (Refer to Section
1.5, “Accident Prevention Tag Usage.”)
3. Disconnect the battery negative (-) cable (Fig. 4-2, 1)
at the battery negative (-) terminal.
Figure 4- 2 Disconnect the Battery Negative (-) Cable
4. Remove the two hex-head capscrews (Fig. 4-3, 1),
two lockwashers (2), two flat washers (3) and two
spacers (4) securing the tethers (right-5 and left-6)
to the seat riser.
5. Remove the four hex-lock elastic nuts (Fig. 4-3, 7)
and four flat washers (8) securing the seat (9) to the
seat riser (10).
6. Carefully remove the seat (Fig. 4-3, 9) from the cab.
7. If the seat is to be replaced: Remove the two hex-
head capscrews (Fig. 4-3, 11 and 12), two washers
(13), seat belt assembly (14), two spacers (15) and
two flanged hex nuts (16). Transfer these parts and
two tethers (5-right and 6-left) to the replacement
seat with the seat out of the cab.
Figure 4-3 Seat Mounting Arrangement
b. Seat Installation
Note: ALWAYS replace elastic-lined nuts with new
elastic-lined nuts to help ensure proper fastening.
1. Position the seat (Fig. 4-3, 9) on the seat riser (10).
Align the studs on the seat with the mounting holes
in the seat riser. Secure the seat to the riser with four
flat washers (8) and four new hex-lock elastic nuts (7).
Torque nuts to 20 lb/ft (27 Nm).
2. Anchor the tethers (Fig. 4-3, right-5 and left-6) to the
seat riser (10) using two spacers (4), two flat
washers (3), two lockwashers (2) and two hex-head
capscrews (1).
OH2420
1
MA8750
3
14
12
1
9
6
16
10
8
7
16
14
13 11
13
15
2
4 5
4 3
15
2
1