SkyTrak 6036 Service Manual - Manual (Page 20)

General Information and Specifications
2.4 Model 6036 Legacy
2.2 INTRODUCTION
2.2.1 Service Methods
Appropriate service methods and proper repair
procedures are essential for safe, reliable operation of
this vehicle and the safety of the individual doing the
work. This Service Manual provides general direction for
accomplishing service and repair work with tested, effective
techniques. Following them will assure reliability.
There are many variations in procedures, techniques,
tools and parts for servicing vehicles, as well as work
skills. This manual cannot possibly anticipate all such
variations and provide advice or cautions for each one.
Accordingly, anyone who intends to depart from the
instructions in this manual must first consider personal
safety and then vehicle integrity.
IMPORTANT: JLG recommends the use of
environmentally sound waste storage and disposal
practices. NEVER drain fluids on the ground or into a
sewer or catch basin. Use suitable collection containers,
then store and/or dispose of waste products in an
approved and safe manner. Check and obey all Federal,
State and/or Local regulations regarding waste storage,
disposal and recycling.
2.2.2 The Owners/Operators Manual
The Owners/Operators Manual provides information you
need to properly operate and maintain this vehicle.
IMPORTANT: Before you operate this vehicle, read the
manual completely and carefully, so that you will understand
the safety instructions and the operation of the controls
and safety equipment. You must comply with all Danger,
Warning and Caution notices. They are for your benefit.
All references to the right side, left side, front and rear are
given from the operator’s seat looking in a forward direction.
2.2.3 Replacement Parts and Warranty
Information
For reference when ordering replacement parts or making
service inquiries about the vehicle, the vehicle serial
number is required to help assure the provision of correct
parts and information. Before ordering parts or initiating
service inquiries, make note of the serial number.
The vehicle serial number plate (Fig. 2-1, 1) is located at
the front of the vehicle on the frame sway cylinder upright.
Figure 2-1 Vehicle Serial Number Plate Location
IMPORTANT: The replacement of any part on this
vehicle with any other than a JLG authorized replace-
ment part can adversely affect the performance, durabil-
ity, or safety of the vehicle, and will void the warranty.
JLG
disclaims liability for any claims or damages,
whether regarding property damage, personal injury or
death arising out of the use of unauthorized replacement
parts.
A warranty registration form must be filled out by the JLG
Authorized Service Center (ASC), signed by the purchas-
er and returned to JLG when the vehicle is sold and/or put
into use.
Registration activates the warranty period and helps to
assure that warranty claims are promptly processed. To
guarantee full warranty service, verify that the distributor
has returned the business reply card of the warranty
registration form to JLG.
2.2.4 Disclaimer
JLG reserves the right to make changes to and to add im-
provements upon its product at any time, without public
notice or obligation. JLG also reserves the right to discon-
tinue manufacturing any product at its discretion at any
time.
OH0280
1