SkyTrak 6036 Service Manual - Manual (Page 204)

Engine: Cummins 4BT3.9
7.26 Model 6036 Legacy
8. Disconnect the back-up alarm harness connector
(Fig. 7-30, 4) from alarm (5). Disconnect and
remove the back-up alarm.
Figure 7- 30 Battery Hold-down and
Back-up Alarm Location
9. Position a suitable container beneath the radiator
(Fig. 7-31, 1). Remove the radiator cap (not shown)
and open the radiator drain petcock (2). Allow the
coolant to drain into the container. Close petcock
after draining.
10. Disconnect the radiator overflow hose (Fig. 7-31, 3)
from the overflow bottle (4). Disconnect and remove
the overflow bottle from vehicle.
Figure 7-31 Radiator Drain Petcock
Note: The exhaust system must be removed from the
vehicle before engine removal. Refer to Section 7.9.1,
“Exhaust System Removal.”
11. Label and disconnect the alternator ground wire
(Fig. 7-32, 1), D+ (2) and B+ (3) harness wire leads.
1
2
5
MA7970
2
3
4
OA1310
1
2
3
4