SkyTrak 6036 Service Manual - Manual (Page 34)

General Information and Specifications
2.18 Model 6036 Legacy
2.6.5 Hydraulic System
a. Hydraulic Fluids
The hydraulic system is factory-filled with ISO Grade 46
anti-wear hydraulic oil. When filling the hydraulic system,
use an anti-wear hydraulic oil meeting ISO Grade 46 with
-40° F (-40° C) pour point/ASTM viscosity SUS 215 at
100° F (38° C), or a 10W motor oil that meets the
requirements of U.S. ordinance specification MIL-L-2104C.
Products known to meet these requirements include:
ISO-46 HYDRAULIC OIL
• GULF HARMONY 46 AW
• AMOCO RYKON 46
• MOBIL DTE-25
• ARCO DURO AW S-215
• SHELL TULLUS 46
• BENZ PETRAULIC 46-7C
• SUN SUNVIS 821 WR
• CHEVRON AW HYDRAULIC OIL 46
• TEXACO RANDO HD 46
• CITGO PACEMAKER XD-46
SAE 10W MOTOR OIL
• CASTROL/DEUSOL CRD
• ESSO ESSOLUBE D-3HP
• ESSO ESSOLUBE XD-3
• CASTROL AGRICASTROL HDD
• SHELL RIMULA CT
• SHELL RIMULA X
• SHELL RIMULA TX
Note: For -30° F to +70° F (-34° C to +21° C), 5W20
motor oil with -50° F (-45° C) pour point can be substituted.
However, above 70° F (21° C), hydraulic system oil must
be changed to ISO-46 hydraulic oil or SAE 10W motor
oil.
b. Hydraulic System Capacity
System capacity .............................57.5 gal (217,6 liters)
Reservoir capacity .............................32.2 gal (122 liters)
2.6.6 Engine
a. Engine Fluids and Lubricants
1. Engine oil:
Diesel Engine Oil, SAE 15W40
For most climates, use 15W40 motor oil that meets API,
CD or CE (severe duty diesel engine) specifications.
Additives are not necessary. In cold climates where
ambient (outside air) temperatures are consistently below
32° F (0° C), 10W30 motor oil can be used; however,
continuous use of low viscosity oil may cause premature
engine wear.
2. Cooling system (engine coolant):
In general, use a 50/50 mix of premium-quality, ethylene
glycol (commonly referred to as “anti-freeze/anti-boilover”)
and water. Additives are not necessary.
3. Fuel:
In general, use No. 2 diesel fuel. From November 15 to
March 15 when operating in cooler climates where
ambient (outside air) temperatures are consistently at or
below 32° F (0° C), use a 50/50 mix of #1 and #2 diesel
fuels. Use good quality diesel fuel, and change the fuel
filter regularly. Additives are not necessary.
b. Engine Capacities
1. Engine Oil Capacity
Capacity w/filter change .....................11.0 qt (10,4 liters)
Filter ..........................................................1 qt (0,9 liters)
2. Cooling System Capacity (w/o heater):
Capacity ................................................... 4 gal (15 liters)
Overflow bottle capacity .........................3.0 qt (2,8 liters)
3. Fuel Tank Capacity
Total capacity ....................................... 37 gal (140 liters)
Usable capacity................................. 35 gal (132,5 liters)